Product Features # Solid wrought iron arched face and double doors # Unique lattice design and decorative keystone # High efficiency and low emissions are achieved through a NON-CATALYTIC HIGH TECH design - You never have to replace a catalytic combustor to achieve a clean burn # Uses outside or inside air combustion. # Full refractory brick liner # Four stainless steel secondary air tubes # Firebox aerodynamics allow you to open the door without drawing smoke into the room. # Heat radiating high temperature ceramic glass. # Pre-installed, automatic, variable speed blower switch # Heavy duty mig welded construction # Safety tested and listed to Standards in Canada and the United States: ULC S610, ULC S627, UL 127 for zero clearance fireplaces and to S639 for solid fuel burning masonry fireplaces # Cast iron grate with self-closing ash dump # Large capacity ash pan with lid and dual carrying handles # Easy, single lever combustion control # President's Limited Lifetime Warranty Specification Type Specification Emissions (grams per hour) 5.4 Size 38 1/4W x 39 1/2H x 25 1/2D Firebox chamber 22W x 10H x 14D Door size 27 1/4W x 19 3/4H Weight without bricks 310 LBS Weight of bricks 132 LBS Appox. area heated* 1,000-2,000 Heat Output BTU/hr 11,500 - 27,400** Heat output BTU/hr (high burn) 70,000** Burn time (low fire) 9 hours Catalytic combustor no Mobile home approved no R2000 approved yes Max log size 18" Outside combustion air yes Flue diameter 6" Flue size-prefabricated 6" *Figures may vary with individual conditions **Wolf Steel Ltd own test showing realistic BTU using hardwood logs with regular refueling. Heat output will differ depending on chimney draft as well as type, moisture content and size of wood. Requires 6"clearance to combustibles on the sides. CERTIFIED FOR EMISSIONS TO EPA PHASE 2 1990 AND DEQ 1988 STANDARDS